Fluids - Brakes Fluid

• Specification:DOT 4 Plus
• Content [litre]:0,25
• DOT specification:DOT 4
• Weight [kg]:0,301

• Mobil Brake Fluid DOT 4 is recommended by ExxonMobil for use in applications requiring disc, drum and anti-skid braking systems used in average to high performance vehicles requiring DOT 3 or DOT 4 level performance. Recommendations for use include:
• Use only in its concentrated form out of a previously unopened or well sealed container
• Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly.
• Never reuse drained brake fluid.
• Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing.
• Brake fluid should be drained from the vehicle every two years or 40,000 Km (24,000 Miles) and refilled.

Cyclo DOT 3 Brake Fluid 12 fl oz

450°F DOT 3

• High-temp formula 450°F (232°C) min. dry boiling point

• Mixes with all DOT 3 brake fluid

• Formulated for disc & drum 

RAVENOL DOT 4 1 L

optimum ABS characteristics.

chemical stability.

best lubrication efficiency.

neutral behaviour regarding brake parts.

low viscosity at low temperatures.

miscible with all brake fluids of the same specifications.

Designed to protect ingredients against corrosion, reduce friction, give longer life to components and resist temperatures

APPLICATION:  BRAKE FLUIDS

QUALITY:  100% SYNTHETIC

PRODUCT RANGE:  CAR, MOTORCYCLE

OEM APPROVALS:  FMVSS 116 DOT 4 ; SAE J1703

PACKAGING:  0,5L DUNK

ARTICLE NUMBER:  101666

High Performance brake fluid with very high dry boiling point of 617°F (325°C) and wet boiling point of 400°F (204°C). For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme high temperature generated by racing brakes (carbon and ceramic) only allowing a minimal air entrance for brake cooling.

For complete details about this product please click here

APPLICATION:  BRAKE FLUIDS

QUALITY:  100% SYNTHETIC

PRODUCT RANGE:  CAR, MOTORCYCLE

OEM APPROVALS:  FMVSS 116 DOT 4 ; SAE J1703 ; ISO 4925

PACKAGING:  0,5L DUNK

ARTICLE NUMBER:  100948

Extreme High Performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and eliminating contamination while factory sealed. Extremely high dry boiling point 594°F (312°C) helps prevent vapor lock and brake fade during hard use, with excellent recovery time. Wet boiling point 401°F (205°C).

For complete details about this product please click here

APPLICATION:  BRAKE FLUIDS

QUALITY:  100% SYNTHETIC

PRODUCT RANGE:  CAR, MOTORCYCLE

OEM APPROVALS:  FMVSS 116 DOT 5.1 NON SILICONE BASE, DOT 4 ET DOT 3 ; SAE J 1703 ; ISO 4925 (5.1, 4 ET 3)

PACKAGING:  0,5L CAN, 1L CAN, 5L CAN

ARTICLE NUMBER:  100950

100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems in accordance with DOT 5.1, DOT 4 and DOT 3 manufacturers’ recommendations. Specially designed for anti-locking brake system (ABS). Dry boiling point 270 °C / 518 °F. Wet boiling point 185 °C / 365 °F. Standards: FMVSS 116 DOT 5.1 NON SILICONE BASE & DOT 4 & DOT 3; SAE J 1703.

For complete details about this product please click here

APPLICATION:  BRAKE FLUIDS

QUALITY:  100% SYNTHETIC

PRODUCT RANGE:  CAR, MOTORCYCLE

OEM APPROVALSFMVSS 116 DOT 4 ET DOT 3 ; SAE J 1703 ; ISO 4925 (3 ET 4)

PACKAGING:  0,5L CAN, 1L CAN, 5L CAN, 20L DRUM

ARTICLE NUMBER:  102718

100% synthetic brake fluid on polyglycol basis for all types of hydraulic actuated brake and clutch systems meeting DOT 4 and DOT 3 manufacturers’ recommendations. Mixable with DOT 3, DOT 4 and DOT 5.1 NON SILICONE BASE products. Dry boiling point 245 °C / 473 °F. Wet boiling point 158 °C / 316 °F. Standards: FMVSS 116 DOT 4 & DOT 3; SAE J 1703.

For complete details about this product please click here